Frustrating as it may be, there are times when your design concepts for reinforced concrete structures may not come out right since you are using 2D drawings. The truth is that it may be challenging to find a good balance between design intentions and structural reality. This often leads to designers investing a lot of time in producing their initial designs but then spending even more time redoing them repeatedly throughout the process.
This overly optimistic initial phase only makes the rest of the design more challenging, with several hours being spent trying to correct previous mistakes. Such frequent changes can lead to critical scheduling errors and ultimately cost low-quality results. In addition, this whole process cannot be visualised at once as there is no way to represent how the structure should look in 3D.
There are many challenges in rebar detailing; that is why we have listed the most common examples below for your reference. By familiarising yourself with them, you may just find a workaround or solution to each of them.
1. Lack of Coordination between Design and Detailing Teams
The success of the detailing process depends heavily on the input of both the architects and the engineers. The project will likely suffer if they do not work together in the design and detailing process.
The engineer’s job is to make sure that his design is functional, and the architect’s job is to make sure that the design will fit the client’s vision and needs.
The architect must be able to articulate his design intentions to his engineer, and the engineer must translate them into a physical structure. If the architect is only interested in the aesthetics and how it looks, he is not doing his job.
2. Engineers Might Not Understand the Design Intentions
An engineer must understand the design intentions of an architect and vice versa. This is vital for the project’s success, and you cannot expect them to digest it all just by looking at the 2D drawings. 3D is the way to go.
If the engineer does not understand the design, he cannot continue with his work, resulting in extra work time and cost for both the engineer and the architect.
3. Different Gantts for 2D and 3D
Another problem often occurs is that you have 2D drawings and 3D drawings for designing and detailing, respectively. They may be developed in parallel, which can be problematic because different teams are using different Gantts.
This results in a decrease in the coordination and synchronisation between the two teams. There is no way of combining the two Gantts, and you will have to work separately. This will cost more time and effort.
4. Lack of Visualization of the Constructed Structure
There is only one way to visualise your plans, and that is by using 3D drawings. Whenever you are using 2D drawings, then you are not visualising the 3D formed structure. This is a challenge as you cannot see how the structure will look when it is completed.
This is a problem because you will only have a rough idea of how the structure will look. It may not be the same during the stage of your planning. When you are not using 3D drawings, there are things that you have to assume, and from those assumptions, you have to tweak the drawing.
These are just some of the challenges in rebar detailing. As you can see, many of the people involved within their respective projects have a responsibility to coordinate with their peers to go more smoothly than planned.
It isn’t just about finishing everything on time, but it is also about doing it all efficiently. These challenges will play a role in whether or not a project will be successful, and it is up to them all to work through it all to yield a great result by the end.
That being said, you may be looking for reliable rebar suppliers near the Sunshine Coast. In that case, look no further than our selections here at Phoenix Reinforcing. We offer a full delivery service, with all our local deliveries running from our Noosa store. Call us today and let us provide your well-needed rebars in no time!